Control flow

There are two key categories of control flow:

• Declarative : The structure of some value guides both control and the selection of the next expression to evaluate, such as in if and switch expressions.

• Imperative : Control changes abruptly according to a programmer’s command, abandoning regular control flow. Examples are break and continue, but also return and throw.

Imperative control flow often goes hand-in-hand with state changes and other side effects, such as error handling and input/output.

Early return from func

Typically, the result of a function is the value of its body. Sometimes, during evaluation of the body, the result is available before the end of evaluation. In such situations the return <exp> construct can be used to abandon the rest of the computation and immediately exit the function with a result. Similarly, where permitted, throw may be used to abandon a computation with an error.

When a function has unit result type, the shorthand return may be used instead of the equivalent return ().

Loops and labels

Motoko provides several kinds of repetition constructs, including:

• for expressions for iterating over members of structured data.

• loop expressions for programmatic repetition, optionally with termination condition.

• while loops for programmatic repetition with entry condition.

Any of these can be prefixed with a label <name> qualifier to give the loop a symbolic name. Named loops are useful for imperatively changing control flow to continue from the entry or exit of the named loop, such as:

• Re-entering the loop with continue <name>.

• Exiting the loop altogether with break <name>.

In the following example, the for expression loops over characters of some text and abandons iteration as soon as an exclamation sign is encountered.

import Debug "mo:base/Debug";
label letters for (c in "ran!!dom".chars()) {
  Debug.print(debug_show(c));
  if (c == '!') { break letters };
  // ...
}

Labeled expressions

There are two other facets to label​s that are less mainstream, but come in handy in certain situations:

• label​s can be typed.

• Any expression, not just loops, can be named by prefixing it with a label. break allows one to short-circuit the expression’s evaluation by providing an immediate value for its result. This is similar to exiting a function early using return, but without the overhead of declaring and calling a function.

The syntax for type-annotated labels is label <name> : <type> <expr>, signifying that any expression can be exited using a break <name> <alt-expr> construct that returns the value of <alt-expr> as the value of <expr>, short-circuiting evaluation of <expr>.

Judicious use of these constructs allows the programmer to focus on the primary program logic and handle exceptional case via break.

import Text "mo:base/Text";
import Iter "mo:base/Iter";

type Host = Text;
let formInput = "us@dfn";

let address = label exit : ?(Text, Host) {
  let splitted = Text.split(formInput, #char '@');
  let array = Iter.toArray<Text>(splitted);
  if (array.size() != 2) { break exit(null) };
  let account = array[0];
  let host = array[1];
  // if (not (parseHost(host))) { break exit(null) };
  ?(account, host)
}

Labeled common expressions don’t allow continue. In terms of typing, both <expr> and <alt-expr>​'s types must conform with the label’s declared <type>. If a label is only given a <name>, then its <type> defaults to unit (()). Similarly a break without an <alt-expr> is shorthand for the value unit (()).

Option blocks and null breaks

Motoko lets you opt in to null values, tracking possible occurrences of null values using option types of the form ?T. This is both to encourage you to avoid using null values when possible, and to consider the possibility of null values when necessary. Motoko simplifies the handling of option types with some dedicated syntax: option blocks and null breaks.

The option block, do ? <block>, produces a value of type ?T, when block <block> has type T and, importantly, introduces the possibility of a break from <block>. Within a do ? <block>, the null break <exp> !, tests whether the result of the expression, <exp>, of unrelated option type, ?U, is null. If the result <exp> is null, control immediately exits the do ? <block> with value null. Otherwise, the result of <exp> must be an option value ?v, and evaluation of <exp> ! proceeds with its contents, v of type U.

The following example defines a simple function that evaluates expressions built from natural numbers, division and a zero test, encoded as a variant type:

type Exp = {
  #Lit : Nat;
  #Div : (Exp, Exp);
  #IfZero : (Exp, Exp, Exp);
};

func eval(e : Exp) : ? Nat {
  do ? {
    switch e {
      case (#Lit n) { n };
      case (#Div (e1, e2)) {
        let v1 = eval e1 !;
        let v2 = eval e2 !;
        if (v2 == 0)
          null !
        else v1 / v2
      };
      case (#IfZero (e1, e2, e3)) {
        if (eval e1 ! == 0)
          eval e2 !
        else
          eval e3 !
      };
    };
  };
}

To guard against division by 0 without trapping, the eval function returns an option result, using null to indicate failure.

Each recursive call is checked for null using !, immediately exiting the outer do ? block, and then the function itself, when a result is null.

Repetition with loop

The simplest way to indefinitely repeat a sequence of imperative expressions is by using a loop construct:

loop { <expr1>; <expr2>; ... }

The loop can only be abandoned with a return or break construct.

A re-entry condition can be affixed to allow a conditional repetition of the loop with loop <body> while <cond>.

The body of such a loop is always executed at least once.

while loops with precondition

Sometimes an entry condition is needed to guard each iteration of a loop. For this kind of repetition use the while <cond> <body> form of loop:

while (earned < need) { earned += earn() };

Unlike a loop, the body of a while loop may never be executed.

for loops for iteration

An iteration over elements of some homogeneous collection can be performed using a for loop. The values are drawn from an iterator and bound to the loop pattern in turn.

let carsInStock = [
  ("Buick", 2020, 23.000),
  ("Toyota", 2019, 17.500),
  ("Audi", 2020, 34.900)
];
var inventory : { var value : Float } = { var value = 0.0 };
for ((model, year, price) in carsInStock.vals()) {
  inventory.value += price;
};
inventory

Using range with a for loop

The range function produces an iterator of type Iter<Nat> with the given lower and upper bound, inclusive.

The following loop example prints the numbers 0 through 10 over its eleven iterations:

import Iter "mo:base/Iter";
import Debug "mo:base/Debug";
var i = 0;
for (j in Iter.range(0, 10)) {
  Debug.print(debug_show(j));
  assert(j == i);
  i += 1;
};
assert(i == 11);

More generally, the function range is a class that constructs iterators over sequences of natural numbers. Each such iterator has type Iter<Nat>.

As a constructor function, range has a function type:

(lower : Nat, upper : Int) -> Iter<Nat>

Iter<Nat> is an iterator object type with a next method that produces optional elements, each of type ?Nat:

type Iter<A> = {next : () -> ?A};

For each invocation, next returns an optional element of type ?Nat.

The value null indicates that the iteration sequence has terminated.

Until reaching null, each non-null value, of the form ?n for some number n, contains the next successive element in the iteration sequence.

Using revRange

The function revRange is a class that constructs iterators, each of type Iter<Int>. As a constructor function, it has a function type:

(upper : Int, lower : Int) -> Iter<Int>

Unlike range, the revRange function descends in its iteration sequence, from an initial upper bound to a final lower bound.

Using iterators of specific data structures

Many built-in data structures come with pre-defined iterators. Below table lists them

Type	Name	Iterator	Elements	Element type
[T]	Array of T​s	vals	The array’s members	T
[T]	Array of T​s	keys	The array’s valid indices	Nat
[var T]	Mutable array of T​s	vals	The array’s members	T
[var T]	Mutable array of T​s	keys	The array’s valid indices	Nat
Text	Text	chars	The text’s characters	Char
Blob	Blob	vals	The blob’s bytes	Nat8

User-defined data structures can define their own iterators. As long they conform with the Iter<A> type for some element type A, these behave like the built-in ones and can be consumed with ordinary for-loops.